Get my estimate →

Slabsight / Guides / How to measure

Guide

How to measure your countertops

Ten minutes with a tape measure gets you a far tighter estimate than a preset size. Here's how fabricators do it.

1. Measure each run in inches

Measure along the back wall from end to end for each straight run of cabinets. Where two runs meet in a corner, measure one run all the way into the corner and the other only from the edge of the first top, so the corner square isn't counted twice.

2. Measure the depth

Standard base cabinets are 24 in deep, and countertops usually overhang to about 25½ in. Islands and peninsulas with seating are deeper; measure the full top, overhang included.

3. Turn it into square feet

For each piece, multiply length × depth in inches and divide by 144. Add the pieces up. Example: a 120 × 25.5 in run is 21.3 sq ft.

4. Note the cutouts

Count sinks (undermount or drop-in) and any drop-in cooktop. Slide-in ranges sit between two pieces and don't need a cutout.

5. Backsplash

Measure the wall length that gets backsplash and choose 4 in or full height (usually about 18 in, up to the upper cabinets).

On Slabsight, pick I measured on the first step and enter each piece in inches; your total updates as you type. The fabricator still templates (measures precisely) before cutting.

Enter your measurements.

Start my estimate →